How to use the manual breast pump – Philips AVENT Tire-lait manuel User Manual

Page 7

Advertising
background image

5

GB

6) Repositioning the pump on the breast from time to time can help

stimulate your milk ducts.

Practice with your pump to find the best technique for you.

However, if the process becomes very painful, stop and consult
your breastfeeding advisor.

9. How to use the manual breast pump

1) Wash your hands thoroughly and make sure your breasts are clean.

Gently squeeze a little milk from each nipple to ensure milk ducts are
not blocked.

2) Make sure you have sterilised and carefully assembled your pump

exactly as shown in sections 3 and 6.

3) Consult the ‘Hints to help you succeed’ section.

4) Relax in a comfortable chair, leaning slightly forward (use cushions

to support your back). Make sure you have a glass of water nearby.

5) Press the funnel and Let-down Massage Cushion of the pump firmly

against your breast, making sure that no air can escape – otherwise
there will be no suction.

6) As you gently push down on the pump handle, you will feel the

suction on your breast. You don’t need to depress the handle fully
to create a vacuum – only as much as is comfortable. Your milk will
soon start flowing, even though you may not use all the suction the
pump can generate.

7) Begin by pumping 5-6 times rapidly to initiate let-down. Then, hold the

handle down for 2-3 seconds, and allow it to return to its resting place.
These 2-3 second cycles imitate your baby’s natural suckling pattern
and allow the milk to flow between strokes.

8) Milk should begin to flow after the first few strokes. Don’t worry if

your milk does not flow immediately. Relax and continue pumping.

Do not continue pumping for more than 5 minutes at a time if NO

result is achieved. Try expressing at another time during the day.

Advertising
This manual is related to the following products: