Philips Mini-blender et coffret repas Philips AVENT - Manual (Page 7)

- Do not touch the cutting edges of the mill blade unit when you handle or clean it. The cutting
edges are very sharp and you could easily cut your fingers on them.
Caution
- Always unplug the appliance before you assemble, disassemble or make adjustments to the
blender or the wet mill and before you start to clean the appliance.
- Never use any accessories or parts from other manufacturers or that Philips does
not specifically recommend. If you use such accessories or parts, your guarantee becomes
invalid.
- Do not exceed the maximum level indicated on the accessories.
- Do not exceed the maximum quantities and processing times indicated in the table.
- Let hot ingredients cool down before you chop them in the wet mill or pour them into the
blender beaker (max. temperature 80°C).
- Never use the wet mill for more than 30 seconds without interruption.
- Do not process dry ingredients such as coffee beans and dried beans in the wet mill.
- Noise level: Lc = 86 dB(A).
Philips avEnt storage cups
Warning
- In the Philips AVENT storage cups, food heats faster than in standard feeding bottles or
containers.
- Always check the food temperature before you start to feed.
- Do not heat up baby food in a microwave oven, as this could cause uneven heating of the food
and could scald your baby.
- Do not let children use the cups and lids without adult supervision.
Caution
- Always clean and sterilise the cups and lids before you use them.
- The Philips AVENT storage cups are not suitable for transporting fluids.
- Food colourings may cause discolouring of the cups and lids.
- Do not place heavy items on the cup when the lid is on it.
- Inspect the cups and lids before each use.
- Throw away the cups and lids at the first sign of damage or weakness.
- Do not leave the cups and lids in sunlight when not in use and do not boil or sterilise them for
longer than recommended, as this may weaken them.
Safety features
Built-in safety lock
This feature ensures that you can only switch on the appliance if the beakers have been placed on
the motor unit in the correct position. When the beakers have been assembled correctly, the built-in
safety lock is unlocked.
thermal cut-out
The appliance is equipped with a thermal cut-out that automatically cuts off the power supply to
the appliance if it overheats.
If the appliance suddenly stops running:
1 Pull the plug out of the wall socket.
2 Let the appliance cool down for 30 minutes.
3 Put the plug in the wall socket.
4 Switch on the appliance again.
Contact your Philips dealer or an authorised Philips service centre if the thermal cut-out is activated
too often.
EngliSh 7