Barco R500 - Manual (Page 117)

12. Display setup
Autoimage works only for data signals.
How to set up AutoImage?
1. Press MENU to activate the Tool bar
2. Press → to select the Display setup item
3. Press ↓ to Pull down the Display setup menu
4. Use ↑ or ↓ to select AutoImage setup (image 12-12)
5. Press ENTER
A dialog box is displayed.
(image 12-13)
6. Use the arrow keys to select the desired item and press ENTER to activate or disactivate the item.
Image 12-12
Image 12-13
How to perform AutoImage ?
1. Press AutoImage on the RCU
A textbox showing a progress bar is displayed.
During the AUTOIMAGE measuring process the data source disappears temporarily (logo is displayed if back-
ground is set to logo )
12.10 Blanking
What can be done ?
The image can be blanked in several ways :
R5976694 IQ PRO R500 01/02/2007 111