Barco R500 - Manual (Page 91)

9. Signal Menu
9. SIGNAL MENU
Overview
• Switching mode
• Background
9.1 Switching mode
Switching from one source to another
To minimize undesired effects when switching from one source to another, one can use the Seamless switching mode, beside Seam-
less switching there is a wide choice of several effects which render the source switching transitions more enjoyable.
How to select a switching mode ?
1. Press MENU to activate the Tool bar
2. Press → to select the Signal item
3. Press ↓ to Pull down the Signal menu
4. Use ↑ or ↓ to select Switching mode
5. Press → to pull down the menu
6. Use ↑ or ↓ to select the desired switching mode (image 9-1)
7. Press ENTER
A white bullet shows the active effect.
The next source switching will be done using the selected effect
Image 9-1
The Random mode will select a new switching mode at each source switching i.e. there will never be 2 suc-
cessive source switchings with the same effect.
The Seamless switching mode is not used in the Random mode.
The switching effects are only possible in the full screen mode
R5976694 IQ PRO R500 01/02/2007 85