Barco R500 - Manual (Page 133)

14. Desktop integration
Image 14-4
Software compatibility
Desktop Integration is only possible when using server software version V1.2 (and later).
14.2 Setting up the desktop environment
Setup
To customize the desktop environment one should go through the iQ Pro menu provided on the All programs start menu.
• My Layouts: allows the selection of the different PiP layouts in the same way as in the projector OSD.
Image 14-5
• My Sources: allows the selection of the different sources: selectable sources may be all the possible sources or only the
available sources depending on the setting in the Projector control menu.
Selecting a source in the desktop environment implies that the source is placed in a window and displayed in the native reso-
lution if specified in the Projector control menu.
The My Layouts and the My Sources are placed as a shortcut in the Start menu so as to be rapidly accessible. Note that these menu
items then replace the standard Windows
TM menus My music and My pictures menus, this is also a preference which can be set in
the Projector Control menu.
How to select a layout from the Start menu
1. Open the Start menu
2. Select and open the My layouts menu
A menu containing the existing layouts is displayed (image 14-6)
3. Select the desired layout
R5976694 IQ PRO R500 01/02/2007 127