Barco R500 - Manual (Page 166)

15. iQ Network
Image 15-57
installation menu
How to add a projector to the list ?
1. Click on the three suspension points to open the projector selection dialog box. (image 15-58)
2. Click on the Add button.
A dialogbox is displayed. (image 15-59)
3. Enter the projector name or browse the network.
4. Click on OK.
5. Enter the Location (optional).
6. Click on Connect.
Following message is displayed : “Connected to <projectorname>...”
Image 15-58
Image 15-59
How to select an existing projector by its name ?
1. Click on the three suspension points to open the projector selection dialog box, image 15-58
2. Open the listbox and select the projector. (image 15-60)
the location will also be filled (if it has been entered previously).
3. Click on Connect.
Following message is displayed : “Connected to <projectorname>...”
Image 15-60
How to select an existing projector by its location ?
Can be useful when the projector name is not known.
1. Click on the three suspension points to open the projector selection dialog box, image 15-58
2. Open the listbox and select the location. (image 15-61)
160 R5976694 IQ PRO R500 01/02/2007