Barco R500 - Manual (Page 163)

15. iQ Network
Image 15-50
mail configuration screen
Image 15-51
Mail “from” configuration
The “from” field of the received mails i.e. the name of the sender (in this case the iQ Pro server) can be configured in the server
software.
Therefore the E-mail address has to be filled in the Networking tab of the iQ Control Server properties dialogbox
Image 15-52
15.7.3 Projector Firmware Upgrade
What can be done ?
The client software allows to do an upgrade of the projector’s firmware.
The upgrade is done with a binary file (extension = “.bin”) which is sent to the projector using the LAN connection.
Single projector as well as multiple projector (group) upgrade is possible
How to upgrade the firmware ?
1. Click on Configuration in the toolbar
2. Click on Upgrade to open the firmware upgrade screen
See image 15-53.
3. Use the Browse key to select the desired bin file.
R5976694 IQ PRO R500 01/02/2007 157