Barco CINE7 R9010050 - Manual (Page 16)

3. Source Connections
3.2 Connecting a Composite Video source.
Which signal to the video input?
Connect Composite video signals from a VCR, OFF air signal decoder, etc..
If a line multiplier is built in, the default position of this line multiplier soft option is ON (active). The video
input signal will be displayed as a non interlaced image (= improved image stability). To enable or to disable
this function, enter the adjustment mode and change the position of the ON/OFF toggle switch (see chapter
’Random access’ adjustment mode).
Image 3-2
Video connection
Video input selection via the RCU
1. Press digit button 1
Video input selection via the keypad
1. press ADJUST key.
The General access menu is displayed on the screen. (image 3-3)
2. Use the cursor keys to highlight 1.
3. Press ENTER to select the highlighted source.
Image 3-3
12 R5976584 BARCO CINE7 26022003