Barco CINE7 R9010050 - Manual (Page 20)

3. Source Connections
Image 3-7
3.5 Connecting a RGB Analog source with Tri level composite sync
Which signal can be connected to the input?
RGB analog input terminals with tri level sync input or with tri level sync on green (BNC terminals). The projector detects automati-
cally where the sync signal is located.
Image 3-8
RGB3S or RG3sB connection
RGB3S or RG3sB selection via the RCU
1. Press digit button 4.
RGB3S or RG3sB selection via the local keypad
1. Press ADJUST key to start up the adjustment mode.
The General Access menu will be displayed. (image 3-9)
2. Use the cursor keys to highlight 4
3. Press ENTER to select the highlighted source.
16 R5976584 BARCO CINE7 26022003