Barco CINE7 R9010050 - Manual (Page 98)

9. Service Mode
How to Undo Convergence R & B to Midposition?
As long as the projector is playing on the same source (= same adjustment block) it is possible to return to the previous settings.
Undo R&B Convergence to Mid is displayed in stead off R&B Convergence to Mid.
1. Push the cursor key ↑ or ↓ to highlight Undo R&B Convergence to Mid. (menu 9-31)
2. Press ENTER to reset the All settings to the previous settings.
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
UNDO R & B CONVERGENCE MID
GR CONVERGENCE MID
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 9-31
9.4.7 Green Convergence to Midposition
What can be done?
All convergence settings for green are set to midposition.
This item is password protected.
How to set Green Convergence to Midposition?
1. Push the cursor key
↑
or
↓
to highlight GR Convergence Mid. (menu 9-32)
2. Press ENTER to select.
A confirmation screen will be displayed.
3. Press ENTER to confirm, press EXIT to cancel the reset.
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 9-32
How to Undo Green Convergence to Midposition?
As long as the projector is playing on the same source (= same adjustment block) it is possible to return to the previous settings.
Undo GR Convergence to Mid is displayed in stead off GR Convergence to Mid.
1. Push the cursor key
↑
or
↓
to highlight Undo GR Convergence to Mid. (menu 9-33)
2. Press ENTER to reset the All settings to the previous settings.
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
UNDO GR CONVERGENCE MID
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 9-33
94 R5976584 BARCO CINE7 26022003