Barco CINE7 R9010050 - Manual (Page 95)

9. Service Mode
9.4.1 Starting Up Memory Management
How to start up the Memory Management?
1. Push the cursor key
↑
or
↓
to highlight Memory Management and press ENTER to select. (menu 9-21)
The Memory Management menu will be displayed. (menu 9-22)
SERVICE MODE
PROJECTOR SET UP
MEMORY MANAGEMENT
COMMON SETTINGS
I2C DIAGNOSTICS
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 9-21
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 9-22
9.4.2 Copy a Block
What can be done?
This will copy the settings of the selected block into the active block.
How to Copy a Block?
1. Push the cursor key ↑ or ↓ to highlight Copy a Block and press ENTER to select. (menu 9-23)
The Copy Mode menu will be displayed.
2. Push the cursor key
↑
or
↓
to to select a block. (menu 9-24)
3. Press ENTER to copy the settings of the selected block to the active block you are working on.
Note: All current settings will be overwritten with the settings of the block which is copied.
A confirmation screen will be displayed.
4. Press ENTER to confirm, press EXIT to cancel the saving.
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 9-23
COPY MODE
Nr.Src Fh Fv Inp Conf
1 1 15.6 50 Video FC
2 3 31.2 60 RGB3S RT
3 - 15.6 50 Intern FC
4 2 31.5 50 RGB3S FC
5 - 33.7 60 Intern FC
6
7
8
Active block nr. 1
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 9-24
9.4.3 Delete a Block
This item is password protected.
What can be done?
This will delete the selected block.
R5976584 BARCO CINE7 26022003 91