5 port 2 video/s-video (optional), 6 peaking, 56 8.5.6 peaking – Barco CINE7 R9010050 User Manual
Page 60: Port 2 video/s-video (optional), Peaking, Random access adjustment mode, How to set up, 5 port 2 video/s-video (optional) what can be done, How to configure port 2, 6 peaking what can be done
8. Random Access Adjustment Mode
The possibility is offered to decode the NTSC video signals via the normal American IRE standard or via the European EBU standard.
How to set up ?
How to set up ?
1. Push the cursor key
↑
or
↓
to select Decoding. (menu 8-13)
2. Press ENTER to toggle between IRE and EBU.
EBU
European standard of decoding color images
IRE
American standard of decoding color images
PICTURE TUNING
COLOR BALANCE
SYNC: FAST
DECODING : EBU
PORT2 :
VIDEO
PEAKING
LINE MULTIPLIER : ON
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 8-13
8.5.5
Port 2 Video/S-Video (Optional)
What can be done?
Port 2 can be used as Video or S-Video input.
How to configure Port 2?
1. Push the cursor key
↑
or
↓
to highlight Port2. (menu 8-14)
2. Press ENTER to toggle between Video or S-Video.
PICTURE TUNING
COLOR BALANCE
SYNC: FAST
DECODING : EBU
PORT2 :
VIDEO
PEAKING
LINE MULTIPLIER : ON
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 8-14
8.5.6
Peaking
What can be done?
Peaking improves the contours in an projected image.
The Peaking function is only available for RGBS, RGsB, component, tri level and component tri level sources.
56
R5976584 BARCO CINE7 26022003