Barco CINE7 R9010050 - Manual (Page 61)

8. Random Access Adjustment Mode
How to adjust Peaking?
1. Push the cursor key
↑
or
↓
to highlight Peaking and press ENTER. (menu 8-15)
Note: During the creation of new settings for a RGB source the corresponding peaking is switched on as default.
The Peaking menu will be displayed. (menu 8-16)
The following frequency areas are available:
Low Frequency Peaking 15–45Hz
Mid Frequency Peaking 45–85Hz
High Frequency Peaking 85–110Hz
2. Push the cursor key ↑ or ↓ to select the desired frequency area or off and press ENTER to activate.
3. Press EXIT to return to the Picture Tuning menu.
PICTURE TUNING
COLOR BALANCE
SYNC: FAST
DECODING : EBU
PORT2 :
VIDEO
PEAKING
LINE MULTIPLIER : ON
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-15
PEAKING
OFF
LOW FREQUENCY
MID FREQUENCY
HIGH FREQUENCY
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-16
8.5.7 Line Multiplier Settings
Overview
• Starting up Line Multiplier settings
• Switching the multiplier ON/OFF
• Motion Processing On/Off
• Output Mode
• Video Equalizing
• Noise Reduction
• Contrast Enhancement
• Split Screen On/Off
• Advanced Settings
8.5.7.1 Starting up Line Multiplier settings
What can be done?
The multiplier eliminates the video line patterns and improves the image stability.
In addition:
• The time base correction virtually eliminates the timing jitter caused by the common videocassette recorders.
• De-interlacing gets rid of line flicker.
• Film mode processing makes sure that material that has been converted from 24 Hz cinema to video (2:2 and 3:2 pull down) is
displayed without artifacts.
• Dynamic noise reduction can be used to improve noisy video sources.
• Static contrast enhancement allows the user to adjust the image contrast to personal taste.
• Several detail-enhancing filters bring out details.
Line multiplying is only possible for Video, S-Video, Component Video images on standard line frequency and
RGB signals on 15 kHz.
The setting of the line multiplier will be saved together with the source number. Each time this source number
is selected, the last saved version will be loaded.
R5976584 BARCO CINE7 26022003 57