Barco R59770449/01 - Manual (Page 31)

4. Configurator
The overview window gives the following items:
• Device type
• Host name
• IP address
• MAC address
• Plug-in name
How to add
1. Click Configuration on the menu and select Add device via scan... (1a). (image 4-3)
Or,
right click on a not connected projector in the preview pane to open the content menu and select Add
device via scan.. .(1b)
Or,
press Insert key.
A network scan is started and a device overview window is displayed (2a, 2b).
2. To select a device, just click on that device (3).
To select multiple devices, hold down the Ctrl button and click on the devices to add to the configuration.
3. Click OK to add the selected devices to the configuration (4).
Only the devices with installed plug-ins and which are not yet in the configuration are added to the
configuration.
Image 4-3
Add devices via scan
R59770449 DC TOOLSET 15/12/2009 27