Barco R59770449/01 - Manual (Page 78)

A. Recovery a projector with special plug-in
Image A-9
Uncheck all items except dp80
Update all other software
1. Click again on Update now.
The update dialog window opens again with the message that the projector is from an unknown type
(image A-6).
2. Click on the combo box and select the correct projector type.
Click OK to continue.
The Update package selection window opens (image A-7).
3. Select the package and click Next.
Version information is collected again. All not updated software is checked.
4. Click Next to display the update overview.
5. Click Install.
The versions on the first page are installed. A reboot of the projector will be necessary. When the
reboot is done, click OK on the displayed reboot message, the installation continues. When finished,
an extra selection window opens with additional updates. (image A-10)
6. Click OK to install these extra update.
A reboot is necessary. When the reboot is finished, click OK to continue. When the installation is
finished, an Installation OK message is displayed.
74 R59770449 DC TOOLSET 15/12/2009