Barco R59770449/01 - Manual (Page 37)

4. Configurator
Image 4-9
Decorator properties
Decorator position
The extra information can be place in the north, south, east or west of the projector pictograph.
Click on the desired radio button to determine the decorator position.
Decorator content
The following information can be displayed in the configuration preview:
•
Projector name
• Connection settings
• Lamp shutter status
• Active files
• Device type
4.6 Reconnect a device
Via the context menu
1. Right click on a not connected projector in the preview pane. (image 4-10)
A context menu opens.
2. Select Connect.
The device tries to make a connection and to retrieve data. When it is successful the pictograph border
becomes green, the properties are filled out. When it is not successful, the border stays gray and a
device not responding message is displayed.
Image 4-10
Connect device via context menu
Via the device properties
1. Select a not connected device in the preview pane. (image 4-11)
R59770449 DC TOOLSET 15/12/2009 33