Barco R59770449/01 - Manual (Page 73)

A. Recovery a projector with special plug-in
A. RECOVERY A PROJECTOR WITH SPECIAL PLUG-IN
When can it be used?
When something happens during the update process and the control software is damaged, use the re-
covery procedure to recover the projector.
When the control software gets corrupt during normal operation, recover the projector via the recovering
procedure.
Do not use this recovery procedure if it is not really necessary !
A.1 Recovery preparations
Overview
1. Start up DC Toolset.
2. Create a new configuration with File → New → Configuration. (image A-1)
3. Enter a name for the configuration and click OK. (image A-2)
4. Add projector to be upgraded to the configuration as follow:
a) Click Configuration → Add → Digital Cinema → Barco Digital Cinema projector.
b) Click on Connect.
c) Enter the IP address (if known) or click on Device scan and select the corresponding projector out
of the list. Make sure that your computer has an IP address within the same range of the projector
to recover. (image A-3)
Error, Failed to make connection, and warning, Projector is NOT a digital cinema projector, message
are displayed. Click OK on both to continue.
5. Click on Modules → Updater or click on the updater icon. (image A-4)
Image A-1
Create new configuration
R59770449 DC TOOLSET 15/12/2009 69