BT Paragon 200 - Manual (Page 13)

10
Paragon 200 - Edition 4.3 – 26th Sept ’00
Note
If you make a mistake when entering a number,
press the DEL button to delete the last digit.
To stop the process at any time, press the
ANSWER ON/OFF button.
To store a one-touch number
Press buttons in the order shown
You can store 3 one touch numbers of
up to 32 digits long.
Press and release, the display shows
MEMORY
.
The prompt says “Please select the
location”.
Press the button under which you want
to store the number.
The prompt says “Please enter the
number ”.
KEYPAD
Enter the phone number you want
to store.
The prompt announces the phone
number and the memory button where
it is stored.
To make a one-touch call
HANDSET
Lift handset
Press the one-touch button you want.
The number is dialled.
Using the one-touch buttons
To delete/change a one-touch number
To change:
Simply follow the steps to store a
one-touch number. The new number
replaces the existing number.
To delete:
Press until the display shows MEMORY.
The prompt says “Please select the
location”.
The prompt says “Deleted”.
Sel
OK
OK
M1-3
M1-3
Sel
OK
Del
To adjust the earpiece volume during a call
To increase the volume in the earpiece.
Display indicates the level.
To decrease the volume in the
earpiece.
After you replace the handset, the
volume automatically returns to the
middle level.
Vol
M1-3
TELEPHONE