BT Paragon 200 - Manual (Page 9)

6
Paragon 200 - Edition 4.3 – 26th Sept ’00
SETTING
UP
4 Check Dial Mode setting (default TB)
3 Connect the telephone line cord
If you do not have a modern phone socket, call
Freephone 0800 800 150 and ask for a BT
engineer to come and fit the correct socket.
This is a chargeable service.
9V DC
LINE
Use the dialling mode switch on the underside
of your Paragon 200.
Your Paragon 200 should be pre-set to TB which
gives you Tone dialling. This ensures the phone
will work with all modern digital exchanges.
If you do not get a dialling tone, try setting the
dialling mode to P.
If you are connecting to a switchboard, check
with your switchboard operator or
communications manager which dialling mode
you need. Your Paragon 200 is approved for all
compatible switchboards.
P
T
TB
HANDSET
MODE
9V DC
LINE
HANDSET
2 Connect handset cord to base
5
Plug the mains adaptor cord into the
back of the telephone
CAUTION
DISCONNECT
9V DC
LINE