BT Paragon 200 - Manual (Page 19)

Paragon 200 - Edition 4.3 – 26th Sept ’00
16
To play back messages
Ring your answering machine as
normal.
Press and release during the outgoing
message. The prompt says “Please enter
your 4 digit security code”
.
PIN
Use the keypad to enter your security
PIN. Wait to hear the confirmation
beep after each digit.
After the last digit, the prompt says
“You have X messages”
and begins to
play them.
You can now control your answering
machine by pressing the appropriate
button on the keypad:
Play messages.
Skip back to previous message.
Delete the message being played
(or delete all messages at the end of
play back).
Skip forward to the next message.
To switch on your answering machine
If you have forgotten to switch on your
answering machine
Ring your answering machine from
another phone
After 20 rings, your Paragon 200 will
automatically answer the call.
HANG UP
Your answering machine is now
switched on.
4
GHI
2
ABC
5
JKL
6
MNO
Please note
When calling your Paragon 200 from another
phone, it allows two attempts to enter the
correct PIN. If this is not done, you hear the
message “Thank you for calling” and the
machine hangs up.
To set your PIN
Press buttons in the order shown
Press and release until the display
shows SECURITY CODE.
The prompt says “Please enter your
4 digit security code”
and displays the
current PIN.
KEYPAD
Enter the 4-digit PIN you want.
To confirm the PIN displayed.
Sel
OK
OK
ANS
WER
MA
CHINE