BT Paragon 200 - Manual (Page 18)

15
Paragon 200 - Edition 4.3 – 26th Sept ’00
To use Call Screening
You can let your Paragon 200 answer a
call and have the loudspeaker switched
on so you can hear the caller. This
gives you the option of picking up the
handset and speaking to them or letting
them leave a message.
While the Paragon 200 is answering
a call or while idle.
Adjust the loudspeaker volume.
The level is shown at the bottom of
the display.
Vol
To use Caller Return (Auto 1471)
Caller Return automatically dials 1471 after a
caller has left a message on your answering
machine and records the announcement giving
the telephone number (if available) and the time
of the call. So even if a caller chooses not to
leave a message, you may still have their
telephone number recorded.
To switch on Caller Return
Press and release until the display
shows 1471.
Switches between ON and OFF.
Prompt will confirm the setting
displayed.
While the Caller Return setting is
switched ON, the display shows 1471.
Sel
OK
OK
To adjust the playback volume
During playback:
Adjust the loudspeaker volume.
The level is shown at the bottom of
the display.
Vol
Using Remote Access
You can switch on your answering machine from
another phone and, providing you are using a
TouchTone
TM keypad, play back your messages
and memos.
ANS
WER
MA
CHINE
The pre-set code is 0000.