Philips SCF286-05 - Manual (Page 9)

assembling the sterilizer
There are several ways to assemble the sterilizer.
1 With only the small basket on the base to sterilize small items such as pacifiers (Fig. 9).
2 With only the large basket on the base to sterilize medium-sized items such as toddler plates or
toddler cutlery (Fig. 10).
3 With the large basket and the small basket on the base to sterilize up to 6 11 fl. oz. (330ml)
bottles. Place the bottles upside down in the large basket and place the bottle dome caps, screw
rings and nipples in the small basket (Fig. 11).
Note: When you fill the small basket, put the nipples on the bottom, place the screw rings loosely on top
of the nipples and clip the bottle caps onto the two pillars in the small basket.
Note: Make sure all parts that need to be sterilized are completely disassembled and place them in the
basket with their openings pointing down to prevent them from filling up with water.
Using the appliance
Use the sterilizer for its intended household use as described in this manual.
Only place items in the sterilizer which are suitable for sterilizing. Do not sterilize items that are
filled with liquid, e.g. a teether with cooling fluid.
Note: Before you sterilize bottles and other items, clean them first (see section ‘Preparing for sterilizing’).
1 Use a baby bottle and pour exactly 3.4 fl. oz. (100 ml) water directly into the water reservoir
of the base (Fig. 2).
2 Assemble the sterilizer (see section ‘Assembling the sterilizer’) and place the items to be
sterilized in it.
3 Place the lid on top of the small or large basket (Fig. 5).
4 Put the plug in an electrical outlet.
5 Press the power-on button to switch on the appliance (Fig. 6).
Note: If you plug the appliance into the electrical outlet after you have pressed the power-on button, the
sterilizer starts to heat up immediately.
SCF287/SCF286
, The sterilizing light lights up to indicate that the appliance is on.
, When the sterilization process is finished, the ready light goes on. After 3 minutes the ready
light goes out to indicate that you can now safely open the sterilizer.
SCF288/SCF285/SCF284
, The sterilizing light lights up to indicate that the appliance is on.
, When the sterilization process is finished, the appliance turns off automatically.
6 Remove the lid.
Wait until the appliance has cooled down before you remove the lid.
Be careful, hot steam may come out of the sterilizer.
7 Remove the bottles and other items from the basket. Use the tongs to remove the
smaller items.
Be careful, the sterilized items may still be hot.
Note: Make sure you wash your hands thoroughly before you touch the sterilized items.
EngliSh 9