Philips SE8881B-22 - Manual (Page 36)

36
3
Select [On]/[Off], and press [OK] to
confirm.
» The setting is saved.
» ECO is displayed in standby mode.
Note
• When ECO is activated, the connection range between
the handset and the base station can be reduced.
Name the handset
The name of the handset can be up to 14
characters. It is displayed on the handset screen
in standby mode.
1
Access the “Phone settings” menu on
the handset or base station (see “Access
the phone settings menu” in the previous
paragraph in this chapter).
2
Select [Phone name], then press [OK] to
confirm.
3
Enter or edit the name. To erase a
character, select [Clear].
4
Press [Save] to confirm.
» The setting is saved.
Set the display language
Note
• This feature only applies to models with multiple-
language support.
•
Languages available for selection vary from country to
country.
• You can set a different language separately on the
handset and base station. When you change the display
language on the handset, it does not mean the display
language on the base station is changed as well.
1
Access the “Phone settings” menu on
the handset or base station (see “Access
11 Phone settings
You can customize the settings to make it your
own phone.
Access the phone settings
menu
On the handset
Select [Menu] > , then press [OK] to
confirm.
On the base station
1
Press MENU.
2
Select [Phone setup], then press [OK] to
confirm.
Set the date and time
For information, see “Set the date and time”
and “Set the date and time format” in the “Get
started” section.
ECO mode
The ECO mode reduces the transmission
power of the handset and base station.
1
Access the “Phone settings” menu on
the handset or base station (see “Access
the phone settings menu” in the previous
paragraph in this chapter).
2
Select [Eco mode], then press [OK] to
confirm.
EN