Philips SE8881B-22 - Manual (Page 43)

43
number can replace the detect number you
set in the menu. For example, you set 604 as
the detect number and 1250 as the prefix.
When you have dialed out a number such as
6043338888, your phone changes the number
to 12503338888 when it dials out.
Note
• The maximum length of a detect number is 5 digits. The
maximum length of an auto prefix number is 10 digits.
Set auto prefix
1
Access the “Services” menu on the handset
or base station (see “Access the services
menu” in the previous paragraph in this
chapter).
2
Select [Auto prefix], then press [OK] to
confirm.
3
Enter the detect number, then press [OK]
to confirm.
4
Enter the prefix number, then press [OK]
to confirm.
» The setting is saved.
Note
• To enter a pause, press and hold .
Note
• If the prefix number is set and the detect number is left
empty, the prefix number is added to all outgoing calls.
Note
• The feature is unavailable if the dialed number starts
with * and #.
Manage the area code
Note
• This feature only applies to models with area code
support.
You can define an area code (up to 5 digits).
This area code is automatically removed from
an incoming call if it matches with the code you
define. Then the phone number is saved in the
call log without an area code.
Activate auto removal of the area
code
1
Access the “Services” menu on the handset
or base station (see “Access the services
menu” in the previous paragraph in this
chapter).
2
Select [Area code], then press [OK] to
confirm.
3
Enter the area code, then press [OK] to
confirm.
» The setting is saved.
Deactivate auto removal of the area
code
1
Access the “Services” menu on the handset
or base station (see “Access the services
menu” in the previous paragraph in this
chapter).
2
Select [Area code], then press [OK] to
confirm.
3
Press [Clear] to delete all the digits.
4
Press [OK] to confirm.
» The setting is saved.
Auto prefix
This feature checks and formats your outgoing
call number before it is dialed out. The prefix
EN