Philips SE8881B-22 - Manual (Page 40)

40
1
Access the “Sounds” menu on the handset/
base station (see “Access the sounds
menu” in the previous paragraph in this
chapter).
2
Select [Ring tones], then press [OK] to
confirm.
3
Select a ringtone, then press [OK] to
confirm.
» The setting is saved.
Set the silent mode
You can set your phone to silent mode and
enable the silent mode for a specified duration.
When the silent mode is activated, your phone
does not ring or send any alerts or sound.
Note
•
When you press to find your handset, or when you
activate the alarm, your phone still sends an alert even
when the silent mode is activated.
1
Access the “Sounds” menu on the handset/
base station (see “Access the sounds
menu” in the previous paragraph in this
chapter).
2
Select [Silent mode], then press [OK] to
confirm.
3
Select [On]/[Off], then press [OK] to
confirm.
4
Select [Start & end], then press [OK] to
confirm.
5
Set the start time and end time of the
silent mode, then press [OK] to confirm.
» The setting is saved.
» is displayed.
Set the key tone
Key tone is the sound made when you press a
key on the handset.
14 Sound settings
You can customize the sound settings of your
phone.
Access the sounds menu
On the handset
Select [Menu] > , then press [OK] to
confirm.
On the base station
1
Press MENU.
2
Select [Sounds], then press [OK] to
confirm.
Set the handset’s ringtone
volume
You can select among 5 ringtone volume levels
or [OFF].
1
Access the “Sounds” menu on the handset/
base station (see “Access the sounds
menu” in the previous paragraph in this
chapter).
2
Select [Ring volume], then press [OK] to
confirm.
3
Select a volume level, then press [OK] to
confirm.
» The setting is saved.
Tip
•
To turn the ringtone off, press and hold in standby
mode. Then is displayed on the screen.
Set the handset’s ringtone
You can select from 15 ringtones.
EN