Philips SE8881B-22 - Manual (Page 44)

44
Dial mode is the telephone signal used in your
country. The phone supports tone (DTMF) and
pulse (rotary) dial. Consult the service provider
for detailed information.
Set the dial mode
1
Access the “Services” menu on the handset
or base station (see “Access the services
menu” in the previous paragraph in this
chapter).
2
Select [Dial mode], then press [OK] to
confirm.
3
Select a dial mode, then press [OK] to
confirm.
» The setting is saved.
Note
• If your phone is in pulse dial mode, press * during a call
for temporary tone mode. Digits entered for this call
are then sent out as tone signals.
First ring
If you have subscribed to the caller ID service
with your service provider, your phone can
cancel the first ring before the caller ID is
displayed on the screen. After the phone is
reset, it can detect automatically if there is a
caller subscription and start to cancel the first
ring. You can change this setting to suit your
preference. This feature only applies to models
with first ring support.
Turn the first ring on/off
1
Access the “Services” menu on the handset
or base station (see “Access the services
menu” in the previous paragraph in this
chapter).
2
Select [First ring], then press [OK] to
confirm.
Network type
Note
• This feature only applies to models with network type
support.
1
Access the “Services” menu on the handset
or base station (see “Access the services
menu” in the previous paragraph in this
chapter).
2
Select [Network type], then press [OK].
3
Select a network type, then press [OK].
» The setting is saved.
Select the recall duration
Make sure that the recall time is set correctly
before you can answer a second call. In normal
case, the phone is already preset for the recall
duration. You can select among 3 options:
[Short], [Medium] and [Long]. The number of
available options varies with different countries.
For details, consult your service provider.
1
Access the “Services” menu on the handset
or base station (see “Access the services
menu” in the previous paragraph in this
chapter).
2
Select [Recall time], then press [OK] to
confirm.
3
Select an option, then press [OK] to
confirm.
» The setting is saved.
Dial mode
Note
• This feature only applies to models that support both
tone and pulse dial.
EN