Philips SE8881B-22 - Manual (Page 15)

15
3
Press the numeric buttons to enter the
date and time.
Note
• If the time is in 12-hour format, press * on the handset/
base station to select [AM] or [PM].
4
Press [OK] to confirm.
Set the date and time format
1
Access the phone settings menu to set the
date and time in either way:
• On the handset, select [Menu] >
> [Date & time], then press [OK] to
confirm.
• On the base station, press MENU,
select [Phone setup] > [Date & time],
then press [OK] to confirm.
2
Select [Date format] or [Time format].
3
Press / on the handset or base station.
4
Select [DD/MM/YY] or [MM/DD/YY] as
the date display, and [12 Hours] or [24
Hours] as the time display. Then press
[OK] to confirm.
» The setting is saved.
Note
• The date and time format setting is country-dependent.
Charge the handset
Place the handset on the base station to
charge the handset. When the handset is
placed correctly on the base station, you hear a
docking sound.
» The handset starts charging.
Caution
• Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
• Use only the supplied batteries.
•
Risk of decreased battery life! Never mix different
brands or types of batteries.
Warning
•
Check the battery polarity when inserting in the
battery compartment. Incorrect polarity may damage
the product.
Configure your phone
(country dependent)
1
When using your phone for the first time,
you see a welcome message.
2
Press [OK].
Select the country
Select your country, then press [OK] to
confirm.
» The language setting is saved.
Set the date and time
Tip
•
To set the date and time later, press [Back] to skip this
setting.
1
Access the phone settings menu to set the
date and time in either way:
• On the handset, select [Menu] >
> [Date & time], then press [OK] to
confirm.
• On the base station, select [Phone
setup], then press [OK] to confirm.
2
Select [Set date]/[Set time], then press
[OK] to confirm.
EN