Philips SCF310-20 - Manual (Page 7)

EN
12. Troubleshooting Guide
Lack of suction
No milk being expressed
Pain in the breast area
when expressing
Milk is drawn up the
Let-down Massage
Cushion
Cracking/discoloration
of pump parts
Lost or broken parts
Pump does not come
away easily
Check that all the pump components have been assembled
correctly and that the the white valve is the right way up.
Ensure that the diaphragm and Let-down Massage Cushion are
fitted securely to the pump body and a perfect seal is created.
Ensure suction is created and the pump is correctly assembled.
Relax and try again, expression may improve after practice.
Please refer to the ‘Hints to help you succeed’ section.
You may be pumping too hard. You do not need to use all the
suction the pump can generate. Try depressing the handle
halfway and remember the 2-3 second pumping rhythm.
Consult your health professional/breastfeeding advisor.
Remove and refit the Let-down Massage Cushion ensuring
it is firmly attached and pushed far enough down the funnel.
Try leaning slightly forward.
Avoid contact with abrasive or antibacterial detergents as
these can damage the plastic. Combinations of detergents,
cleaning products, sterilizing solution, softened water and
temperature fluctuations may, under certain circumstances,
cause the plastic to crack. If this or any other signs of aging
occur, do not use. Contact Philips AVENT Customer Services
for spare parts. Other items in the dishwasher may cause
discoloration of the device. Keep the product out of direct
sunlight, as prolonged exposure may cause discolouration.
Spare parts are available through Philips AVENT Customer
Services (see back cover for contact details).
If the pump does not come away easily from the breast, it may
be necessary to break the suction by placing a finger between
the breast and Let-Down Massage Cushion or between the
breast and pump funnel.
If you are still experiencing problems, please contact Philips AVENT Customer
Services (see back cover for contact details). Alternatively contact your health
care professional/breastfeeding advisor.
EN
11. Choosing the right nipple for your baby
Philips AVENT nipples can be used on the Philips AVENT feeding bottle.
Philips AVENT nipples are clearly numbered on the side to indicate flow rate.
8 9
1
3
2
4
0 m +
6 m +
1 m +
3 m +
3 m +
1 hole
2 holes
3 holes
4 holes
1 slot
NEWBORN FLOW
EXTRA SOFT SILICONE NIPPLE
Ideal for newborns and breastfed
babies of all ages.
SLOW FLOW
EXTRA SOFT SILICONE NIPPLE
Ideal for newborns and breastfed
babies of all ages.
MEDIUM FLOW
SOFT SILICONE NIPPLE
For bottle fed babies at 3 months
of age and up.
FAST FLOW
SOFT SILICONE NIPPLE
Offers a faster flow for older babies.
VARIABLE FLOW
SOFT SILICONE NIPPLE – SLOT CUT
Provides an extra fast flow and
accommodates thicker liquids.
Flow rate can be varied by turning
the bottle to align the I, II or III markings
on the nipple with baby’s nose.