Philips SCF640-12 - Manual (Page 4)

For your child’s safety and health
WARNING!
•
Before first and after every use, take all items apart, wash
and rinse thoroughly. Sterilise using an AVENT Steam Steriliser or boil
for five minutes. Wash your hands thoroughly and ensure surfaces are
clean before contact with sterilised components.
•
DO NOT use abrasive
cleaning agents or anti-bacterial cleaners. Excessive concentration of
detergents may eventually cause plastic components to crack. Should
this occur, replace immediately.
•
Dishwasher safe – food colourings
may discolour components.
•
Before each use, inspect all items. Throw
away at the first sign of damage or weakness. For hygiene reasons, we
recommend replacing teats/spouts after 3 months.
•
Always assemble
teats when wet.
•
Keep teats in a dry, covered container. DO NOT leave
in sunlight when not in use. Never use teats as a soother.
•
DO NOT
warm contents in a microwave oven as this may cause uneven heating
and could scald your baby. Always check food temperature before
feeding.
•
Always use this product under adult supervision. DO NOT
allow child to play with small parts or walk/run while using bottles or
cups.
•
Continuous and prolonged sucking of fluids will cause tooth
decay. Drinks other than milk and water, such as fruit juices and flavoured
sugary drinks are not recommended. If they are used, they should be well
diluted and only used for limited periods, not constantly sipped.
•
MAGIC
& SPORTSTER CUPS and spouts are not suitable for hot, fizzy or pulpy
drinks. DO NOT use cups with spouts to mix infant formula as this may
clog the non-spill valve and cause components to leak. Always ensure the
valve is properly assembled. Magic cups should only be used as an aid to
help children progress to using ordinary cups.
•
Conforms to EN 14350.
Spare teats and spouts with valves are available separately.
AVENT® is here to help
Freephone: 0800 289064 (UK ONLY), 1800 509 021 (IRL ONLY),
1 300 364 474 (AUSTRALIA NATIONAL), 02 9457 0127 (AUSTRALIA NSW ONLY).
e-mail: [email protected]