Philips SCF312-01 - Manual (Page 7)

HELPFUL TIP!
Need Help? Call us at 1.800.54.AVENT or visit www.philips.com/AVENT
Batteries will last for approximately 6 hours. The light
on the control handle will display a continuous
RED
pulsing flash to warn you when it is time to replace
them. There will be enough power for approximately
1 more pumping session, with no drop-off in
performance, before the pump switches itself off.
11 12
Connecting the Electronics Connecting the Electronics
5
6
7
Firmly push the control handle onto
the pump body so that it sits securely
on top of the silicone diaphragm.
For electric use connect the wall
plug cord to the control handle and
plug into an electrical wall outlet.
For battery use, open the top of
the battery pack and insert 4 x AA
batteries. (For compatible batteries,
see page 2).
Connect the power cord to
the control handle.
i
Parts you will need for steps 5-8:
Control Handle
Battery Pack Wall Plug Cord
Assembled
Pump Body
(see pages 9-10)