Barco R9002240 - Manual (Page 14)

Connections
3-4 5975688 BARCOVISION 1609S 131097
Connecting a RGB Analog source to port 3.
Connect your RGB source via an interface to Port 3.
Always use an interface when a computer and local monitor have
to be connected to the projector.
Barco interfaces which can be applied :
Universal analog interface R9826100
RGB 120 MHz analog interface R9826570
VGA interface 120V R9828079
230V R9828070
MAC interface 120V R9828059
230V R9828050
MAGIK interface 120V R9828129 & R9828128
230V R9828120 & R9828121
RGB analog input with automatic sync detection. (Separate H and
V sync inputs, with composite sync input or with sync signals on
green)
Pin configuration D9 connector of the Analog input.
1 not connected
2 ground RGBS
3 RED
4 GREEN
5 BLUE
6 ground RGBS
7 ground RGBS
8 Hor/comp. sync
9 Vert. sync
Analog Input Selection :
with the RCU or build in RCU, press digit button 3.
Connecting a RGB Analog source to port 4/5.
RGB analog input terminals with separate H and V sync inputs, with
composite sync input or with sync signals on green (automatic sync
detection).
Always use an interface when a computer and local monitor have
to be connected to the projector. See 'Connecting a RGB Analog
source to port 3' for a list of BARCO interfaces which can be applied.
RGB input selection :
(RGB : R, G, B signals with automatic sync detection)
with the RCU or the build in RCU : press digit
button 4 or 5
,13 ,13 S B
% + 9 DIQVU 6I6GPBÃDIU@SAà !HC“ PI
PAA
v‰r  &$Âu€Ã‡r €
361
&$Âu€
PAA PI
QPSUÃ
WD9@P
QPSUÃ#$
SB7ÃÃCW
Wƒp
S B 7
QPSUÃ%ÃS@HPU@
8PHHVID86UDPI
QSPE@8UPSÃHP9@ QPX@SH6DIT
QPSUÃ!
TWD9@P
&$Âu€
PI PAA
BS@@IГ)Г‚ƒr h‡v‚hy
S@9Г)Г†‡hqi’
QPSUÃ"
8‚€ƒCƒp
DIQ DIQ 5 *
7 C W
DIQVU 6I6GPBÃDIU@SAà !HC“ 21
2
v‰r  &$Âu€Ã‡r €
&$Âu€
PAA PI
QPSUÃ
WD9@P
QPSUÃ#$
SB7ÃÃCW
Wƒp
S B 7
QPSUÃ%ÃS@HPU@
8PHHVID86UDPI
QSPE@8UPSÃHP9@ QPX@SH6DIT
QPSUÃ!
TWD9@P
&$Âu€
PI PAA
BS@@IГ)Г‚ƒr h‡v‚hy
S@9Г)Г†‡hqi’
QPSUÃ"
8‚€ƒCƒp