Barco R9002240 - Manual (Page 46)

Service Mode
7-6 5975688 BARCOVISION 1609s 131097
 
  
  
Spot shapes
before dynamic
astigmatism correction
Spot shapes
after dynamic
astigmatism correction
Diagonal
astigmatism correction
(use the and
arrow key)
Axial
astigmatism correction
(use the and
arrow key)
Select with or
then <ENTER>
<EXIT> to return.
IDENTIFICATION
COPY A BLOCK
DELTE A BLOCK
DELETE ALL BLOCKS
CHANGE PASSWORD
CHANGE LANGUAGE
RUN TIME
SET TO MIDPOSITION
CONVERGENCE MID
DYNAMIC ASTIGMATISM
MORE...
SERVICE MODE
DYNAMIC ASTIGMATISM
ON SELECTED SOURCE
RED
GREEN
BLUE
ON GENLOCKED PATTERN
RED
GREEN
BLUE
Select pattern or color
with or
then <ENTER>
<EXIT> to return.
DYNAMIC ASTIGMATISM
First adjust the defocusing
of the image.
SEL : select area using arrow
keys
ADJ : adjust axial astigmatism
using
or , diagonal
astigmatism using
or
Toggle between SEL and ADJ
with <ENTER>
<ENTER> to continue
<EXIT> to return.
SEL : select the adjustment area on the screen where the spot shape
has to be corrected.
Use the arrow keys to select one of the 8 areas. Press ENTER to
continue to ADJ.
ADJ : adjust the spot shape in the axial or diagonal direction when
using the arrow keys for the selected area. Adjust until the spot
shape is circular.
Use the up and down arrow keys for the diagonal astigmatism
adjustment and the left and right arrow keys for the axial astigmatism
adjustment. Press ENTER to continue selecting a new area.
The adjustment direction (axial or diagonal) and adjustment value are
Follow the next procedure :
Highlight 'Dyn. Astigmatism' by pushing the joy disk up or down and
press ENTER to select.
EXIT returns to the path selection main menu.
Select the source type, selected source or genlock pattern, by
highlighting the color for which the spot shape has to be corrected
and press ENTER.
e.g. when selecting RED under 'on genlocked pattern', the projector
switches to a genlocked pattern.
Press ENTER to continue adjustment.
Increase the contrast level using the Contrast Control to near
maximum. Using that "+" Sharpness Key, defocus the image until the
dots are large and easily visible. Press ENTER to continue to SEL.
Dynamic Astigmatism (spot shape adjustment)
The spot shape adjustments correct the spot shape in 8 different
areas on the screen and that for the three colors separately.
The spot shape is adjusted according to the axial axises and the
diagonal axises when using the arrow keys on the RCU.
These adjustments have to be done on a dot pattern (e.g. the internally
generated pattern) with standard line frequency (15 kHz). The
adjustment values are stored in the EEPROM and remain the same for
all frequencies.