Barco R9002240 - Manual (Page 29)

6-7 5975688 BARCOVISION 1609S 131097
Random Access Adjustment Mode
Select with or
then <ENTER>
<EXIT> to return.
Select with or
then <ENTER>
<EXIT> to return.
Focusing
Before starting the 'focusing' adjustment, be sure the lenses are
correctly focused.
Push the control disk up or down to select 'Focusing' and press
ENTER.
RANDOM ACCESS
ADJUSTMENT MODE
PICTURE TUNING
GEOMETRY
CONVERGENCE
FOCUSING
COLOR SELECT
ORBITING
CONTR. MODULATION
SOFT EDGE
Select with or
then <ENTER>
<EXIT> to return.
FOCUSING
RED
GREEN
BLUE
BLUE ON SOURCE
ENTER continues to the Focusing color select menu.
EXIT returns to Internal Crosshatch Selection or Setup Pattern
Selection menu.
ADJUST returns to operational mode.
Focusing color select.
The focusing has to be done for the three colors separately.
Therefore, start by selecting Green by pushing the control disk up
or down and adjust Midpoint, top, bottom left and right focusing.
Return to this focusing color select menu and continue with Red and
Blue. Repeat for both colors Midpoint, top, bottom left and right
focusing.
ENTER selects the focusing menu for the selected color.
EXIT returns to the Random access main menu.
Midpoint focusing
Push the control disk up or down to select midpoint and press ENTER
continue with the midpoint focusing.
Adjust by pushing the control disk to the left or to the right until the
center of the image is sharp.
Press ENTER to return to the focusing menu.
Top image focusing
The same procedure has to be repeated as for the midpoint focusing.
Push the control disk up or down and press ENTER to continue to the
top focusing.
Push the control disk to the left or to the right to adjust the top focusing.
Adjust until the upper part of the image is sharp.
ENTER to return to the Green Focusing menu.
Bottom image focusing
The same procedure has to be repeated as for the midpoint focusing.
Push the control disk up or down to select bottom and press ENTER
to continue to the bottom focusing.
Push the control disk up or down to adjust the bottom focusing. Adjust
until the lower part of the image is sharp.
ENTER to return to the Green Focusing menu.
Left image focusing
The same procedure has to be repeated as for the midpoint focusing.
Push the control disk up or down to select LEFT and press ENTER
to continue to the left focusing.
Push the control disk up or down to adjust the left focusing. Adjust
until the left part of the image is sharp.
ENTER to return to the Green Focusing menu.
Right image focusing
The same procedure has to be repeated as for the midpoint focusing.
Push the control disk up or down to select RIGHT and press ENTER
to continue to the right focusing.
Push the control disk to the left or to the right to adjust the right
focusing. Adjust until the right part of the image is sharp.
ENTER to return to the Green Focusing menu.
FOCUSING
RED
GREEN
BLUE
BLUE ON SOURCE
Select with or
then <ENTER>
<EXIT> to return.
GREEN FOCUSING
MIDPOINT
TOP
BOTTOM
LEFT
RIGHT
When on the Green Focusing menu, press EXIT to return to the
focusing color select menu and continue with the other colors.
Blue on source
After focusing the three color, and a discoloring on a normal image
is still visible, select 'Blue on source' on the Focusing menu and repeat
the above steps for Midpoint, top, bottom left and right focusing.
Press EXIT to return to focusing menu.