Philips AVENT Audio Monitors DECT Baby Monitor SCD570-10 Advanced monitoring Vibration alert User Manual
Page 11
temperature
A baby sleeps comfortably at a temperature between 16°C/61°F and 20°C/68°F. You can set a
minimum and a maximum temperature range. You can also set a temperature alert.
1
To open the temperature submenu, select ‘Temperature’ in the menu. Press OK to confirm.
2
Select ‘Temp Range’ in the temperature submenu and press OK to confirm.
3
Use the + and - buttons to set the minimum temperature range between 10°C/50°F and
19°C/66°F and the maximum temperature range between 22°C/72°F and 37°C/99°F. Press
OK to confirm.
4
Select ‘Alert’ in the temperature submenu. Press OK to confirm.
5
Choose one of the alert options. The options available are sound only, sound and vibration,
vibration only and display only. Press OK to confirm. The temperature alert symbol appears
on the display.
6
Select ‘Temp Scale’ in the temperature submenu. Press OK to confirm.
7
Select ‘Celsius’ or ‘Fahrenheit’ and press OK to confirm.
, The temperature in the set scale appears on the display. If the temperature is within the set
range, the temperature alert symbol has two segments.
, If the temperature is below or above the set range, the temperature alert symbol on the
display has only one segment and flashes. The message ‘TOO COLD’ or ‘TOO HOT’ appears
on the display (Fig. 16).
Cry alert
You can set a cry alert to warn you that the baby is crying.
1
Select ‘Cry alert’ in the menu with the + and - buttons. Press OK to confirm.
2
When the display shows ‘Vibration ON’, press OK to confirm.
, The cry alert indicator appears on the display.
, The cry alert goes off when the sound in the baby room is loud enough to make the fourth
sound level light go on. The parent unit vibrates and the message ‘Cry alert’ appears on the
display for 4 seconds. The cry alert repeats every 8 seconds until the sound becomes less
loud or you deactivate the cry alert (Fig. 17).
3
To deactivate the cry alert, select ‘Cry alert’ in the menu. When the display shows ‘Vibration
OFF’, press OK to confirm.
Clock
The default setting for the clock is hidden. You can choose to show the clock and set the clock time
in the menu of the parent unit.
1
Select ‘Set clock’ in the menu with the + and - buttons. Press OK to confirm.
2
Select ‘Show Time’ and press OK to confirm.
3
Select ‘Set the time’ and press OK to confirm.
4
Set the hour and the minutes and press OK to confirm.
, The clock time alternates with other indications in the message field of the display.
EngliSh
11