InnoMax Hardside Fluid User Manual
Page 6
D.
Slide the wood pieces into the spaces between drawer
sections just as previously done for the bottom set of drawers.
E.
Again be certain that your twelve (or ten, eight drawer)
pedestal is accurately positioned where you want it.
YOU WILL
NOT BE ABLE TO MOVE IT ONCE THE BED IS ASSEMBLED.
F.
Next, without letting it slide out of place, tilt the frame on to one
side.
Avoid moving the pedestal.
After Step 3 you will lower the
frame onto the deck boards which will be mounted on the pedestal.
STEP 2: BUILDING THE PEDESTAL
Captain’s Pedestal
A.
(Some Captain’s Pedestals vary in configuration. If yours
needs some sub-assembly, do it prior to this step. Ask your
sleep consultant for more details.) Lay one of the larger drawer
sections inside the frame, recessed as pictured
B.
Lay the second large drawer assembly sections inside, on
the other side of the frame, as pictured.
C.
Next, tilt the frame on to one side.
Avoid moving the drawer
sections.
After Step 3 you will lower the frame onto the deck
boards which will be mounted on the pedestal.
D.
Now, slide in or attach the door section and wood pieces in the
appropriate slots. These should be snug to assure proper support.
E.
Be certain the assembled Captain’s Pedestal is accurately
centered within the frame and in it’s final position, before
moving to Step 3.
5