InnoMax Hardside Fluid User Manual

Page 8

Advertising
background image

E.

If you purchased upholstered rail caps, attach them to your

frame now. The padded rail caps slip over the frame edges.

At your option, you may wish to secure the caps onto the frame

with screws, if needed.

STEP 5: INSTALL HEATER UNIT

To View the Thermal Guardian heater installation video please

visit:

www.innomax.com/innomaxVideoPages/innomaxWat

erbedHeaterAssemblyVideo.html

or visit

www.youtube.com

under the channel name

InnoMaxSleep

Unplug heater before filling or draining your waterbed. Follow specific

heater manufacturer’s guidelines for detailed installation instructions.

A.

Place the heating pad in the center area of the deck avoiding

the cracks in the deck boards. For Queen or Super Single place

heating pad to one side or the other.

Do Not Place Over Cracks.

B.

Mount the thermostat control to either side of the frame,

depending on where you will plug it in. Control unit may mount

to side or underneath. See manufacturer’s instructions. Use the

screws provided. Securely plug the cord from the heating pad

into the thermostat control.

C.

Run the thermostat control’s sensor tube through the corner

hole inside the frame onto the deck. The sensor tube should be

positioned midway between the frame and the heating pad,

preferably twelve inches away from the heating pad.

D.

To test the temperature control system, plug it in, turn the

thermostat up and place your hand on the heating pad. As soon

as you feel it start to warm up

Unplug The Control From Your

Wall Socket!

CAUTION:

Bodily contact with heater pad surface may be harmful and may be caused by an

under-filled mattress or "bottoming out" on the heater. Use of this heater is strictly prohibited by an

infant, invalid, anyone unable to feel heater, or anyone unable to get out of bed without assistance.

After bed set-up is completed, lie down on mattress to ensure no part of the body is in contact with

the bottom of the deck board. Any contact with the bottom of the bed is "bottoming out" and

could possibly cause harmful burns.

7

Advertising