OR-Fab 86300 PRE RUNNER TIRE CARRIER - ALL PICKUPS User Manual

Before starting installation

Advertising
background image

3651 N. Hwy 89 • Chino Valley, AZ 86323

(928) 636-7080 • www.p-a-g.net

PRE-RUNNER TIRE CARRIER

INSTALLATION INSTRUCTIONS

ALL PICKUPS

KIT # 86300

WARNING

DO NOT install the tire carrier if the wheel offset is

greater than 8" or the “T” handle does not thread into

the tire carrier at least 1”.

WARNING

Always wear eye protection when operating power

tools.

WARNING

Use extreme caution when working near the fuel lines

and the fuel tank. A spark could cause an explosion or

fire resulting in serious personal injury and property

damage.

1

Pre-Runner Tire Carrier - Kit 86300

Before starting installation

1. Carefully read all warnings and instructions com-

pletely before beginning.

2. Verify all parts have been received in this kit by

checking the parts list at the end of this document.

3.

Only install this kit on the vehicle for which it is

specified. If anytime during the installation you

encounter something different from what is outlined

in the instructions, call technical support at (928)

636-7080.

NOTE

Kit parts are prefaced by the word kit and appear in

bold print.

NOTE

This tire carrier will accommodate wheels with an off-

set of about 8” or less as shown. Before installing the

tire carrier, measure the wheel offset to determine if

the tire carrier will accommodate the wheel.

Straightedge

Measure Here

3651 N. Hwy 89 • Chino Valley, AZ 86323

(928) 636-7080 • www.p-a-g.net

Advertising