OR-Fab 87017 JEEP THIRD BRAKE LIGHT MOUNT FOR OR-FAB SPARE TIRE CARRIERS User Manual

I. before starting installation

Advertising
background image

3651 N Highway 89 • Chino Valley, AZ 86323

(928) 636-7080 • www.p-a-g.net

ORF “GECKO”

THIRD BRAKE LIGHT
INSTALLATION INSTRUCTIONS

Kit # 87017

(for use with ORF Tire Carriers & Tire/Can Carriers)

WARNING

Read and understand all instructions, warnings, cau-

tions, and notes in this sheet and in your owner’s man-

ual before you begin the installation of this kit.

WARNING

Use extreme caution when working near glass. Sharp

objects in contact with glass could cause an explosion

of glass resulting in serious personal injury and prop-

erty damage.

1

CHMSL - Kit 87017

I. Before starting installation

1. Read all warnings and instructions completely and

carefully before you begin.

2. Check to make sure the kit is complete (refer to the

Parts list at the end of this document).

3. Only install this kit on the vehicle for which it is

intended. If anytime during the installation you
encounter something different from what is outlined
in the instructions, call technical support at (928)
636-7080.

Tools needed :

*Drill
*5/16" Drill bit
*Test Meter or Test Light.
*Black Electrical Tape.
*Standard hand Tools

NOTE

Parts provided in this kit are prefaced by the word kit

and appear in bold font.

Advertising