2 removing the existing differential, Removing the differential carrier – ARB RD153 User Manual
Page 11
Advertising
2 Removing the Existing Differential
9
2.6
Removing the differential carrier
F
Remove the adjuster nut locking tabs.
F
Remove the bearing caps from the third member.
F
Remove the adjuster nuts.
F
Carefully remove the differential carrier from the third member.
F
Remove the tapered roller bearings from the differential carrier with
a bearing puller (ARB #0770001). (Fig.3.)
HINT :
Check the condition of the bearing for wear and
replace if necessary.
Figure 3.
Advertising