ARB RD153 - Manual (Page 36)

6 Testing & Final Assembly
34
F Turn the compressor (or alternate air source) on to charge the air
supply up to its maximum pressure.
F Rotate one wheel by hand.
F The wheel should rotate freely and the opposite wheel should be
turning in the opposite direction without any resistance or
mechanical noise from within the differential.
F Turn the Air Locker switch to the ‘ON’ position. The illuminated
symbol on the switch cover should light up.
F Rotate the same wheel again.
F Both wheels should rotate together.
F Turn the switch off again.
F Rotate the same wheel.
F The wheels should again rotate in opposite directions.
6.3 Filling the Differential
NOTE : Consult the ARB Air Locker Operating & Service
Manual for recommendations on differential lubricant
specifications.
F Refill the differential until level with the filler hole.
F Rotate the differential center 2 full turns.
F Check the oil level and add oil if necessary.
F Apply thread sealant to filler plug before inserting.
F Replace the filler plug.
F Clean the differential housing of any oil or grease that may collect
dirt or other abrasive particles.