3 installing the air locker, Profiling the seal housing tube – ARB RD153 User Manual
Page 21
Advertising
3 Installing the Air Locker
19
3.8
Profiling the Seal Housing Tube
F
With the seal housing tube now firmly secured into the bulkhead
fitting, bend the tube so that it closely follows the profile of the
differential. (Figs.11.,12. & 13.)
F
Check that the contour of the tube will not interfere with the bearing
caps, the Air Locker, the ring gear or the axle housing.
Figure 11.
Figure 12.
Advertising