5 mounting & connecting the electrical system, Dual air locker system – ARB RD153 User Manual
Page 34
Advertising
5 Mounting & Connecting the Electrical System
32
5.2.2.2
Dual Air Locker System
F
If two Air Lockers are to be installed in the system, ARB
recommends that the switches and solenoids be wired according to
figure 21. For safety reasons, this configuration allows SOLENOID
2 to be actuated only if SOLENOID 1 is already on.
F
Attach the “REAR AIR LOCKER” switch cover to SWITCH 1, and
the “FRONT AIR LOCKER” switch cover to SWITCH 2.
NOTE : Refer to figure 19. for the correct switch terminal
identification and switch orientation.
F
Configure SOLENOID 1 as the air line leading to the rear axle Air
Locker, and SOLENOID 2 as the air line leading to the front axle Air
Locker.
Figure 21.
DUAL AIR LOCKER SYSTEM
Advertising