ARB RD153 - Manual (Page 8)

2 Removing the Existing Differential
6
F Gently tap axles outward and remove them from the differential
center.
NOTE : Rubber oil seals can be easily damaged. Support the
weight of the axle when extracting it across the edges
of the seals.
F Remove all nuts and washers retaining the differential housing.
F Carefully remove the differential third member from the axle
housing.
NOTE : Pry bars may be required to split the third member from
the axle housing.
NOTE : The differential third member is heavy and quite
difficult to handle when covered in oil. Do not drop it!
F Secure the third member to a workbench with the differential carrier
facing upward.