ARB 3415010 - Manual (Page 8)

Last Rev Date:29/10/2008 Page 8 of 20 Fitting instructions# 3783250
Copyright © 2005 by ARB Corporation Limited. All rights reserved, this document must not be reproduced without the express authority of ARB Corporation Ltd
REMOVAL OF BUMPER
18. Undo crash bar mounts from chassis flange.
19. Remove crash bar and lower bumper
assembly and set aside, retain flange nuts for
reuse.
20. If parking sensors fitted and are to be
reused, remove from bumper. Also retain
loom tails and set aside.
Note: Remove parking sensor centre from
sleeve first. Then remove sleeve from bumper.
21. Remove OE fog lamps if fitted and are to be
reused. The plastic surrounds are not to be
reused.
22. Remove bumper cover retaining brackets
from the fenders.