ARB 3415120 - Manual (Page 5)

Last Rev Date: 17 SEPTEMBER 2008 Page 5 of 20 Fitting instructions# 3783312
Copyright © 2005 by ARB Corporation Limited. All rights reserved, this document must not be reproduced without the express authority of ARB Corporation Ltd
REMOVAL OF BUMPER
5. When removing lower trim panels, a
plastic nut located on each side will need
to be prized open with a small flat blade
screwdriver to assist removal.
6. Remove lower bumper retaining screws.
7. Remove plastic engine bay cover above
grille area and set aside. Prise open
plastic plugs with small flat blade
screwdriver or similar as shown.
8. Remove 3 X retaining screws from top
of grille