ARB 3468010 User Manual
Page 7
Last Rev Date: 14 05 08
Page 7 of 21
Fitting instructions# 3786403
Copyright © 2005 by ARB Corporation Limited. All rights reserved, thi s document must not be reproduced without the express authority of ARB Corporation Ltd
11. Once the sections are cutoff from
both sides of the assembly, clean up the
sharp edges with a file etc, and paint
with black paint to protect against rust.
12. Refit assemble back to vehicle using
the rear bolts, finger tighten only.
13. If a winch is going to be fitted to the
vehicle, the plastic radiator air dam
assembly has to be removed from the
front of the vehicle and modified for
winch fitment, this requires the plastic
push in Christmas tree clips to be
removed. In most cases they have to be
cut off using a wood chisel etc.
( New clips are provided in fitting kit
for refittment. )
PHOTO FROM RHS OF VEHICLE