ARB 3436030 - Manual (Page 12)

13/12/05 Page 12 of 12 3783101
If fitting with winch
21. With the winch cable through the roller fair
lead. Mount the hook to the end of the
cable.
22. Wire up the indicator and clearance lamp
assemblies. Use scotch locks to splice
cables to existing indicator and clearance
lamp wiring and cable tie securely.
23. If fitting with winch.
Connect the long winch ‘+’ (positive) & ‘-‘
(negative) cables to the vehicle after the bar is
installed.
Refer to the Warn winch manual for vehicle
wiring instructions.
Ensure that these cables are installed well
clear of sharp, hot or moving objects. Secure
the winch cables to the vehicle and winch
bumper with the supplied cable ties.