ARB 3934020 User Manual
Warning
13/06/06
Page 1 of 13
3782863
If you have any queries regarding the installation of this product please contact the distributor from whom it was purchased, or alternatively the ARB office in your state.
Head Office – ARB Corporation Ltd VIC: 42-44 Garden Street, Kilsyth, Victoria, 3137 Tel: (03) 9761 6622 Fax: (03) 9761 6807
WA: (08) 9244 3553 NSW: (02) 9821 3633 ACT: (02) 6280 7475 SA: (08) 8244 5001 QLD: (07) 3872 3872 NT: (08) 8947 2262 TAS: (03) 6331 4190
ARB WINCH/NON WINCH BUMPER TO SUIT MITSUBISHI PAJERO NM
FLARED. EXCLUDING EXCEED MODEL
PRODUCT No.
3934020 Sahara Bar
3034020 Sahara Bumper
FITTING KIT No. 6171383, 6171762, 6171363
WARNING
FOR VEHICLES EQUIPPED WITH SRS AIRBAG
WHEN INSTALLED IN ACCORDANCE WITH THESE INSTRUCTIONS, THE FRONT
PROTECTION BAR DOES NOT AFFECT OPERATION OF THE SRS AIRBAG.
TAKE NOTE OF THE FOLLOWING:
• THIS PRODUCT MUST BE INSTALLED EXACTLY AS PER THESE
INSTRUCTIONS USING ONLY THE HARDWARE SUPPLIED.
• IN THE EVENT OF DAMAGE TO ANY BULL BAR COMPONENT,
CONTACT YOUR NEAREST AUTHORISED ARB STOCKIST. REPAIRS OR
MODIFICATIONS TO THE IMPACT ABSORPTION SYSTEM MUST NOT
BE ATTEMPED.
• DO NOT USE THIS PRODUCT FOR ANY VEHICLE MAKE OR MODEL,
OTHER THAN THOSE SPECIFIED BY ARB.
• DO NOT REMOVE LABELS FROM THIS BULL BAR.
•
THIS PRODUCT OR ITS FIXING MUST NOT BE MODIFIED IN ANY WAY.
Note:
1
If fitting optional fog lights, fitting kit no. 9381FCK is required.
2
This winch bumper is suitable for Warn 8,000lb & 9,000lb winch only.
Tools Required
10mm, 18mm, 19mm, 21mm Spanners and Sockets. Phillips head screwdriver,
12mm and 13mm drill bit and drill.