ARB 3934020 - Manual (Page 7)

13/06/06 Page 7 of 13 3782863
12. 1. Using a 13mm drill bit, drill through the hole
in the main bracket and into the chassis rail.
13. 1. The mounting bolts for the drilled holes are
fastened using the captive nuts with
extension arms. Feed these through the hole
underneath the chassis rail. The wire can be
manipulated to shape for easier installation.
14. 1. Fasten the brackets using the M12 x 40mm
bolts, Large washers and spring washers.
Note: The inside bolt uses a small M12 washer.