ARB 3932020 - Manual (Page 10)

13/6/08 Page 10 of 11 3786950
.
27. Trim the plastic inner guard liners by
aligning with the bar and using the hole in the
wing as a guide, drill a 6 mm hole and secure
with the M6 hardware supplied
28. Fit number plate to number plate bracket
using 6mm hardware in this position.
Place double sided tape on rear of number
Plate to stop any vibration.
29. Fit number plate to bar using 6mm hardware
using the outer holes of number plate.
Place double sided tape on rear of number
Plate to stop any vibration.
WINCH BAR
NON WINCH BAR